Free for every APSC aspirant · no sign-up
APSC Prelims PYQ Explorer Previous year questions with answers, CCE 2020 to 2025
All 500 questions of the last five APSC Prelims General Studies papers, including the 2026 question paper (CCE 2025), each with the answer and a full explanation. Tap a number below to browse, or pick a subject, chapter, year or level, then read or practise.
Show only
Question type
| Paper | On Assam | Current affairs | Tough |
|---|---|---|---|
| CCE 2025held in 2026 | 28 | 22 | 20 |
| CCE 2024 | 36 | 23 | 30 |
| CCE 2023 | 39 | 27 | 17 |
| CCE 2022 | 28 | 27 | 22 |
| CCE 2020 | 26 | 23 | 3 |
Tap a paper to see its questions. Official PDFs: 2026 question paper (CCE 2025) and papers of 2020 to 2024.
Assam section · 8 subjects · 157 questions
Tap a subject to see its chapters. High, Medium and Low are the chapter priorities from the SuchitraACS PYQ analysis.
Polity21 chapters · 57 Qs
- Fundamental RightsHigh8
- JudiciaryHigh8
- Acts & BillsHigh5
- ParliamentHigh5
- Special Provisions (Art. 371)High4
- Basic Concepts & Rule of LawMedium3
- Constitutional BodiesMedium3
- SchedulesMedium3
- AmendmentsMedium2
- DPSPMedium2
- Elections & DelimitationMedium2
- Federalism & Centre–StateMedium2
- Union & its TerritoryMedium2
- CitizenshipLow1
- Civil ServicesLow1
- Constitution Making & SourcesLow1
- Local GovernmentLow1
- Official LanguageLow1
- State ExecutiveLow1
- Statutory & Other BodiesLow1
- Union ExecutiveLow1
Science & Tech9 chapters · 45 Qs
Assam History8 chapters · 44 Qs
Economy13 chapters · 43 Qs
- Budget & Fiscal PolicyHigh7
- Economic DevelopmentHigh5
- Money & BankingHigh5
- Taxation & GSTHigh5
- Poverty, Inequality & HDIMedium4
- Economic InstitutionsMedium3
- EnergyMedium3
- Infrastructure & IndustryMedium3
- Planning & NITI AayogMedium3
- AgricultureMedium2
- External Sector & TradeLow1
- Financial MarketsLow1
- National IncomeLow1
Environment14 chapters · 42 Qs
- BiodiversityMedium5
- Conventions & ProtocolsHigh5
- Flora & FaunaHigh5
- Pollution & GHGsHigh5
- Reports & CommitteesHigh5
- Climate ChangeMedium3
- Ecology BasicsMedium3
- Movements, Awards & PersonalitiesMedium3
- Sustainable DevelopmentMedium2
- Wetlands & Ramsar SitesMedium2
- Ecosystems & VegetationLow1
- Environmental Laws & ConstitutionLow1
- Govt. InitiativesLow1
- Protected AreasLow1
Assam GK8 chapters · 30 Qs
Geography13 chapters · 26 Qs
- Population & CensusHigh4
- Transport & CommunicationMedium3
- TribesMedium3
- AgricultureMedium2
- Climate & WeatherMedium2
- Drainage & RiversMedium2
- Geology & GeomorphologyMedium2
- Natural Vegetation & EcosystemsMedium2
- OceanographyMedium2
- Earth & UniverseLow1
- Irrigation & Multipurpose ProjectsLow1
- Polar RegionsLow1
- SoilsLow1
Social Justice5 chapters · 24 Qs
Assam Culture5 chapters · 22 Qs
General Knowledge7 chapters · 21 Qs
International Relations7 chapters · 21 Qs
Modern History7 chapters · 18 Qs
Assam Economy5 chapters · 16 Qs
Mapping2 chapters · 14 Qs
Current Affairs4 chapters · 13 Qs
Assam Environment3 chapters · 11 Qs
Assam Mapping3 chapters · 11 Qs
Assam Geography8 chapters · 11 Qs
Art & Culture6 chapters · 10 Qs
Ancient History5 chapters · 7 Qs
Medieval History2 chapters · 2 Qs
157 of 500 questions (31%) were on Assam.
By subject
It is easier to roll a barrel than to pull it because:
- Athe full weight of the barrel comes into play when it is pulled
- Brolling friction is much less than sliding friction
- Cthe surface area of the barrel in contact with the road is more in case of pulling
- Dof a reason other than those mentioned
Show answer and explanationHide answer
Answer(B) rolling friction is much less than sliding friction
Explanation
When a barrel is rolled, only a narrow strip of it touches the ground at any moment, and that strip does not slide over the surface. The only resistance is rolling friction, which comes mainly from slight deformation of the barrel and the ground where they touch. When a barrel is pulled (dragged), its surface has to slide over the ground. Sliding friction then acts, and it is much larger than rolling friction. So it takes much less force to roll a barrel than to drag it.
- Option (A) is incorrect: the barrel's weight presses on the ground whether it is rolled or dragged. Weight is not the reason for the difference.
- Option (C) is incorrect: for ordinary surfaces, friction does not depend much on the area of contact. It depends on the nature of the surfaces and the normal force.
- Option (D) is incorrect: the correct reason is given in option (B).
For future exams
- Static friction is greater than sliding (kinetic) friction, which is greater than rolling friction. Starting to move an object therefore takes more force than keeping it moving.
- Ball bearings and roller bearings in fans, cycles and machines replace sliding friction with rolling friction.
- Lubricants such as oil, grease and graphite reduce friction. An air cushion, as in a hovercraft, almost removes it.
- Fluid friction is called drag. Streamlined shapes in aircraft, ships, birds and fish reduce it.
- Friction is a "necessary evil": it lets us walk, write and brake, but it causes wear and tear and wastes energy as heat.
Micro topic Rolling vs sliding frictionChapter Physics
The mass of a body is different from its weight because:
- (i)Mass is a variable quantity whereas weight is constant.
- (ii)Mass varies very little at different places, whereas weight varies a lot.
- (iii)Mass is constant, but weight decreases as the body moves from the Poles to the Equator.
- (iv)Mass is a measure of the quantity of matter, whereas weight is a force.
Select the correct reason/reasons using the codes given below:
- A(i) only
- B(ii) and (iv) only
- C(iii) only
- D(iii) and (iv) only
Show answer and explanationHide answer
Answer(D) (iii) and (iv) only – official provisional key says (B)
Answer-key note: Official key wrong
Mass does not vary with place, so statement (ii) is wrong; weight decreases slightly from the Poles (g ≈ 9.83 m/s²) to the Equator (g ≈ 9.78 m/s²), so (iii) is correct. Provisional key says B; correct answer is D ((iii) and (iv)). Check the final key.
Official key: B · Answer here: DExplanation
- Statement (i) is incorrect: it reverses the facts. Mass is constant, while weight (W = mg) changes from place to place.
- Statement (ii) is incorrect: the mass of a body does not vary at all from place to place, so saying it 'varies very little' is wrong. Its weight also does not 'vary a lot' on Earth: g is about 9.78 m/s² at the Equator and about 9.83 m/s² at the Poles, so weight changes by only about 0.5%.
- Statement (iii) is correct: mass stays the same everywhere, but g is greater at the Poles than at the Equator because the Earth bulges at the Equator (points there are farther from the centre) and because of the Earth's rotation. Weight therefore decreases as a body moves from the Poles towards the Equator.
- Statement (iv) is correct: mass measures the quantity of matter in a body (SI unit kilogram, a scalar), while weight is the force with which the Earth attracts the body (SI unit newton, a vector).
So (iii) and (iv) correctly explain the difference, which is option (D). APSC's official provisional key gives (B), which depends on statement (ii) and is not supported by physics.
For future exams
- Weight W = mg. A body weighs about one-sixth as much on the Moon as on Earth, but its mass does not change.
- Astronauts in orbit feel weightless because they are in free fall, not because gravity is absent; at about 400 km height gravity is still nearly 90% of its surface value.
- In the standard textbook (uniform-density) model, g decreases with height above the Earth's surface and with depth below it, and becomes zero at the centre.
- A beam balance compares masses and gives the same reading everywhere. A spring balance measures weight, so its reading changes with g.
- 1 kg-wt (kilogram-weight) is about 9.8 N.
Micro topic Mass vs weightChapter Physics
For a given liquid, the rate of evaporation depends on:
- (i)The temperature of the liquid
- (ii)The temperature of air
- (iii)The surface area of the liquid
Select the correct factor/factors using the codes given below:
- A(i) only
- B(i) and (ii) only
- C(ii) and (iii) only
- D(i), (ii), and (iii)
Show answer and explanationHide answer
Answer(D) (i), (ii), and (iii)
Explanation
Evaporation is the change of a liquid into vapour at any temperature below its boiling point; it takes place from the surface of the liquid.
- Factor (i) is correct: a higher liquid temperature gives more surface particles enough kinetic energy to escape, so evaporation increases.
- Factor (ii) is correct: warmer surrounding air supplies heat to the liquid and can hold more water vapour, so evaporation is faster on hot days (wet clothes dry faster in summer).
- Factor (iii) is correct: evaporation is a surface phenomenon, so a larger exposed surface area increases the rate (clothes are spread out to dry; tea cools faster in a saucer).
All three factors affect the rate of evaporation, so option (D) is correct.
For future exams
- NCERT (Class 9, Matter in Our Surroundings) lists four factors: increase in surface area, increase in temperature, decrease in humidity and increase in wind speed all increase evaporation.
- Evaporation causes cooling because the escaping particles take away latent heat from the remaining liquid; this is why sweating cools the body and water stays cool in an earthen pot.
- Evaporation is a surface phenomenon occurring at all temperatures; boiling is a bulk phenomenon occurring at a fixed temperature for a given pressure.
- Humid air already near saturation slows evaporation, which is why sweat does not dry easily in the humid Assam summer.
Micro topic Evaporation factorsChapter Physics
One should not connect a number of electrical appliances to the same power socket because:
- (i)This can damage the appliances
- (ii)This can damage the domestic wiring due to overheating
- (iii)The appliances will not get full voltage
Select the valid reason/reasons using the codes given below:
- A(ii) and (iii) only
- B(ii) only
- C(i) and (ii) only
- D(iii) only
Show answer and explanationHide answer
Answer(B) (ii) only
Explanation
Domestic appliances are connected in parallel, so every appliance on a socket receives the same mains voltage (about 220 V in India). Each added appliance draws its own current, and the total current through the socket and its supply wire is the sum of all these currents.
- Reason (i) is not the valid reason: the appliances themselves get their rated voltage and draw only their rated current, so they are not damaged simply because others share the socket.
- Reason (ii) is valid: the large total current through the socket and wiring causes excessive heating (heat is proportional to I squared R), which can melt insulation, damage the wiring and even cause a fire. This is called overloading.
- Reason (iii) is not valid: in a parallel connection the potential difference across each appliance remains the same; appliances do not get less voltage merely because more of them are connected.
Hence only reason (ii) is correct.
For future exams
- Overloading occurs when too many appliances are connected to a single socket or when supply voltage rises accidentally; a short circuit occurs when live and neutral wires touch directly.
- An electric fuse (wire of low melting point) or a miniature circuit breaker (MCB) cuts off the circuit when current exceeds the safe limit; the fuse works on the heating effect of current (Joule's law).
- Indian homes receive AC supply at 220 V and 50 Hz; separate circuits are rated 15 A for high-power appliances (geysers, heaters) and 5 A for bulbs and fans.
- The earth wire (green insulation) protects users from shocks by providing a low-resistance path to earth for leakage current from metallic bodies of appliances.
Micro topic Electric overloadingChapter Physics
Consider the following pairs of scientists and discoveries:
Scientists Discoveries
- (i)Copernicus Law of gravitation
- (ii)Kepler Laws of planetary motion
- (iii)Galileo Moons of Jupiter
- (iv)Newton Heliocentric theory
Select the correctly matched pairs using the codes given below:
- A(i) and (ii) only
- B(i), (ii), and (iii) only
- C(i), (ii), (iii), and (iv)
- D(ii) and (iii) only
Show answer and explanationHide answer
Answer(D) (ii) and (iii) only
Explanation
- Pair (i) is incorrectly matched: Nicolaus Copernicus proposed the heliocentric theory (Sun at the centre) in De revolutionibus orbium coelestium, published in 1543. The law of universal gravitation was given by Isaac Newton.
- Pair (ii) is correctly matched: Johannes Kepler formulated the three laws of planetary motion (first two in 1609, third in 1619), including elliptical orbits.
- Pair (iii) is correctly matched: Galileo Galilei discovered the four largest moons of Jupiter (Io, Europa, Ganymede, Callisto) with his telescope in January 1610; they are called the Galilean moons.
- Pair (iv) is incorrectly matched: Isaac Newton gave the law of universal gravitation and the laws of motion (Principia, 1687), not the heliocentric theory.
Only pairs (ii) and (iii) are correct, so option (D).
For future exams
- Kepler's laws: (1) orbits are ellipses with the Sun at one focus; (2) a planet sweeps equal areas in equal times (so it moves fastest at perihelion); (3) the square of the orbital period is proportional to the cube of the semi-major axis.
- The geocentric model is associated with Ptolemy (2nd century CE); Aryabhata (5th century CE) proposed that the Earth rotates on its axis.
- Galileo also observed the phases of Venus and sunspots, supporting the heliocentric model.
- NASA's Europa Clipper (launched October 2024) and ESA's JUICE (launched April 2023) are missions to study Jupiter's icy Galilean moons.
Micro topic Copernicus, Kepler, Galileo, NewtonChapter Scientists & Discoveries
From the distance-time graphs of two motorists A and B, it can be seen that:
- AA travelled with uniform speed but B did not
- BA traveled faster than B throughout
- CB traveled faster throughout than A
- DA and B traveled with equal speed
Show answer and explanationHide answer
Answer(C) B traveled faster throughout than A
Explanation
Reading the graph above: both lines are straight, so both motorists moved at uniform speed; B's line is steeper than A's over the whole time shown.
- In a distance–time graph, the slope (steepness) of the line gives the speed: speed = distance covered / time taken.
- A straight sloping line means uniform speed; a curved line means non-uniform speed.
- Of two lines drawn on the same axes, the steeper line represents the faster object, because it covers more distance in the same time.
As per the official key, B's line is steeper than A's over the whole time interval, so B travelled faster than A throughout.
- Option (A) is incorrect as per the key: the graph does not show A alone moving uniformly.
- Option (B) is incorrect: A's line is the less steep one, so A was slower.
- Option (D) is incorrect: equal speeds would need lines of equal slope (parallel lines), which is not the case.
For future exams
- A horizontal line on a distance–time graph means the object is at rest (distance not changing).
- In a velocity–time graph, the slope gives acceleration and the area under the graph gives the displacement (distance for motion in one direction).
- A horizontal line on a velocity–time graph means uniform velocity (zero acceleration).
- Average speed = total distance travelled / total time taken; its SI unit is metre per second (m/s).
- Uniform circular motion has constant speed but changing velocity, because the direction of motion keeps changing.
Micro topic Distance–time graphChapter Physics
Solutions are of many types. Consider the following types of solution with an example each:
- (i)Gas in liquid - Vinegar
- (ii)Solid in liquid - Brine
- (iii)Solid in solid - Brass
- (iv)Liquid in liquid - Coca-Cola
Select the correctly matched pairs using the codes given below:
- A(i) and (ii) only
- B(ii) and (iii) only
- C(i), (iii), and (iv) only
- D(ii), (iii), and (iv) only
Show answer and explanationHide answer
Answer(B) (ii) and (iii) only
Explanation
- Pair (i) is incorrectly matched: vinegar is a solution of acetic acid (a liquid) in water, i.e. a liquid-in-liquid solution. A gas-in-liquid example is aerated (soda) water, which has carbon dioxide dissolved in water.
- Pair (ii) is correctly matched: brine is common salt (sodium chloride, a solid) dissolved in water, i.e. solid in liquid.
- Pair (iii) is correctly matched: brass is an alloy of copper and zinc; alloys are homogeneous mixtures of metals, i.e. solid-in-solid solutions.
- Pair (iv) is incorrectly matched: Coca-Cola and other soft drinks are carbonated, i.e. carbon dioxide gas dissolved under pressure in a liquid, so the key solute pairing is gas in liquid. Its fizz is released when the pressure drops on opening the bottle.
Only pairs (ii) and (iii) are correct, so option (B).
For future exams
- A solution is a homogeneous mixture of two or more substances; the component present in larger amount is the solvent and the other is the solute.
- Other examples: tincture of iodine (iodine, a solid, in alcohol); air (mixture of gases, mainly nitrogen and oxygen); bronze (copper and tin); amalgam (mercury in a metal, liquid in solid).
- Solubility of gases in liquids decreases with rise in temperature and increases with pressure (Henry's law), which is why soft drinks are bottled under pressure.
- Concentration can be expressed as mass by mass percentage, mass by volume percentage or molarity (moles of solute per litre of solution).
Micro topic Types of solutionsChapter Chemistry
Which of the following elements does sugar contain?
- (i)Carbon
- (ii)Nitrogen
- (iii)Hydrogen
- (iv)Oxygen
Select the correct answer using the codes given below:
- A(i), (iii), and (iv) only
- B(i), (ii), and (iii) only
- C(i) and (iii) only
- D(i) and (iv) only
Show answer and explanationHide answer
Answer(A) (i), (iii), and (iv) only
Explanation
Common table sugar is sucrose, with the molecular formula C12H22O11. It is a carbohydrate made of carbon, hydrogen and oxygen only.
- Element (i) carbon is present: 12 carbon atoms per molecule.
- Element (ii) nitrogen is absent: sugars and other carbohydrates contain no nitrogen; nitrogen is characteristic of proteins (amino acids) and nucleic acids.
- Element (iii) hydrogen is present: 22 hydrogen atoms per molecule.
- Element (iv) oxygen is present: 11 oxygen atoms per molecule.
So sugar contains carbon, hydrogen and oxygen, giving option (A).
For future exams
- Sucrose is a disaccharide formed from one glucose and one fructose unit joined by a glycosidic bond; it is a non-reducing sugar.
- Glucose and fructose have the same formula C6H12O6 (they are isomers).
- Carbohydrates have the general formula Cx(H2O)y, which is why they were called hydrates of carbon.
- Heating sugar strongly or treating it with concentrated sulphuric acid (a dehydrating agent) leaves a black mass of carbon, showing that sugar contains carbon.
- Lactose is milk sugar and maltose is malt sugar; both are disaccharides.
Micro topic Elements in sugarChapter Chemistry
Read the following statements regarding "blockchain". Which of the following statements is/are correct?
- (i)It is a method of recording information that makes it impossible or difficult for the system to be changed, hacked, or manipulated.
- (ii)This method can ensure secure transactions, lower compliance expenses, and accurate data transfer processing.
- (iii)This method is used only in the financial services industry.
- (iv)Fuji Nakamori is the pseudonymous name of the person or persons who developed Bitcoin.
Select the correct answer using the codes given below:
- A(i) only
- B(i) and (ii) only
- C(i), (ii), and (iii) only
- D(i), (ii), and (iv) only
Show answer and explanationHide answer
Answer(B) (i) and (ii) only
Explanation
- Statement (i) is correct: a blockchain is a shared, distributed digital ledger in which records are grouped into blocks that are cryptographically linked to earlier blocks; once validated, entries are extremely difficult to alter, hack or manipulate.
- Statement (ii) is correct: because records are tamper-evident and shared by all participants, blockchain can secure transactions, cut reconciliation and compliance costs, and speed up accurate data transfer.
- Statement (iii) is incorrect: blockchain is not limited to financial services; it is used in supply-chain tracking, healthcare records, digital identity, land records, voting systems and more.
- Statement (iv) is incorrect: the pseudonymous creator of Bitcoin is 'Satoshi Nakamoto', not 'Fuji Nakamori'.
Hence only (i) and (ii) are correct.
For future exams
- Satoshi Nakamoto published the Bitcoin white paper 'Bitcoin: A Peer-to-Peer Electronic Cash System' on 31 October 2008; the Bitcoin network went live in January 2009. His/their real identity remains unknown.
- Ethereum introduced 'smart contracts' – self-executing code that runs when preset conditions are met.
- RBI's Central Bank Digital Currency, the e-Rupee, began pilots in November 2022 (wholesale) and December 2022 (retail).
- Since the Finance Act 2022, India taxes income from Virtual Digital Assets (crypto) at a flat 30%, with 1% TDS on transfers.
Micro topic BlockchainChapter IT & Emerging Tech
Consider the following statements:
- (i)NISAR is a low Earth orbit observatory being jointly developed by ISRO and NASA.
- (ii)NISAR is a low Earth orbit observatory being jointly developed by ISRO and European Space Agency.
- (iii)The objective of NISAR is to co- develop and launch a dual frequency synthetic aperture RADAR on an Earth observation satellite.
- (iv)NISAR is planned to launched in 2024.
Select the correct statements using the codes given below:
- A(i) and (iii) only
- B(ii) and (iii) only
- C(i) and (iv) only
- D(i), (iii) and (iv) only
Show answer and explanationHide answer
Answer(D) (i), (iii) and (iv) only
Answer-key note: Fact changed
NISAR was launched on 30 July 2025 (statement said "planned in 2024").
Explanation
- Statement (i) is correct: NISAR (NASA-ISRO Synthetic Aperture Radar) is a low Earth orbit observatory jointly developed by ISRO and NASA.
- Statement (ii) is incorrect: the European Space Agency is not a partner in NISAR.
- Statement (iii) is correct: its objective is to co-develop and launch a dual-frequency SAR on an Earth observation satellite. NASA built the L-band SAR (about 1.25 GHz) and ISRO built the S-band SAR (about 3.2 GHz) and the satellite bus.
- Statement (iv) was correct when the question was set (early 2024), as the launch was then planned for 2024.
Update (outdated fact): The launch slipped, and NISAR was finally launched on 30 July 2025 by GSLV-F16 from the Satish Dhawan Space Centre, Sriharikota. Statement (iv) is therefore outdated today, though the official answer (D) stands for the exam.
For future exams
- NISAR orbits in a dawn-to-dusk sun-synchronous orbit at about 747 km (inclination about 98.5°). GSLV-F16 was the first GSLV flight to a sun-synchronous polar orbit.
- It is the first satellite to carry dual-frequency (L- and S-band) radar, with a large 12-metre deployable mesh reflector antenna. It images almost all of Earth's land and ice surfaces repeatedly, roughly every 12 days.
- Uses: monitoring earthquakes, landslides, volcanoes, glacier and ice-sheet dynamics, crop and forest biomass, soil moisture and coastal changes. Its data is freely available.
- Total cost is about US$1.5 billion, making it among the most expensive Earth-observation satellites. ISRO's share is about Rs 788 crore.
- SAR can image day and night and through clouds, which suits monsoon regions such as Assam (flood and erosion mapping).
Micro topic NISAR missionChapter Space
Consider the following statements:
- (i)India's solar mission Aditya-L1 has been placed in halo orbit around Sun-Earth point 1.
- (ii)Lagrange points are positions of equilibrium for a small object under the gravitational pull of two massive orbiting bodies.
- (iii)There are 5 Lagrange points for the Sun-Earth system.
- (iv)There are 5 Lagrange points for the Earth-Moon system also.
Select the correct statement/ statements using the codes given below.
- A(i) only
- B(i) and (ii) only
- C(i), (ii) and (iii) only
- D(i), (ii), (iii) and (iv)
Show answer and explanationHide answer
Answer(D) (i), (ii), (iii) and (iv)
Explanation
- Statement (i) is correct: Aditya-L1, India's first space-based solar observatory, was inserted into a halo orbit around the Sun-Earth Lagrange point 1 (L1) on 6 January 2024. L1 is about 1.5 million km from Earth towards the Sun.
- Statement (ii) is correct: Lagrange points are positions where the combined gravitational pull of two large orbiting bodies provides the centripetal force needed for a small object to move with them. The small object thus stays in equilibrium relative to the two bodies.
- Statement (iii) is correct: any two-body system such as the Sun and Earth has five Lagrange points, L1 to L5.
- Statement (iv) is correct: the Earth-Moon system also has its own five Lagrange points. The Chinese relay satellite Queqiao, for example, uses a halo orbit around Earth-Moon L2.
Hence all four statements are correct.
For future exams
- L1, L2 and L3 lie on the line joining the two bodies and are unstable. L4 and L5 form equilateral triangles with the two bodies and are stable; Trojan asteroids gather at Sun-Jupiter L4/L5.
- Aditya-L1 was launched on 2 September 2023 by PSLV-C57 from Sriharikota. It carries 7 payloads: 4 remote-sensing (VELC, SUIT, SoLEXS, HEL1OS) and 3 in-situ (ASPEX, PAPA, magnetometer).
- Sun-Earth L1 gives an uninterrupted view of the Sun without eclipses; NASA-ESA's SOHO also operates there.
- Sun-Earth L2 hosts the James Webb Space Telescope (launched December 2021) and ESA's Gaia and Euclid.
- The points are named after Joseph-Louis Lagrange. Leonhard Euler had earlier identified the three collinear points.
Micro topic Aditya-L1 & Lagrange pointsChapter Space
Consider the following statements:
- (i)In computer parlance, a cookie is a malicious computer virus.
- (ii)In computer parlance, a cookie is a small piece of text sent by a website to the internet browser.
- (iii)Internet cookies are used by banking websites only.
- (iv)Internet cookies help the websites to remember the client's visit to the website.
Select the correct statement/ statements using the codes given below.
- A(i) only
- B(ii) only
- C(ii) and (iii) only
- D(ii) and (iv) only
Show answer and explanationHide answer
Answer(D) (ii) and (iv) only
Explanation
- Statement (i) is incorrect: a cookie is not a virus. It is plain stored data, not an executable program, so it cannot replicate or infect a computer by itself. Cookies can, however, raise privacy concerns through tracking.
- Statement (ii) is correct: an HTTP cookie is a small piece of data (text) that a web server sends to the user's browser while the user browses a website. The browser stores it and sends it back with later requests to the same site.
- Statement (iii) is incorrect: cookies are used by almost all kinds of websites, including e-commerce, social media, news and search engines, not only by banking sites.
- Statement (iv) is correct: cookies let websites remember a visitor's previous visits and state. Examples are keeping a user logged in, remembering shopping-cart items and saving preferences such as language.
Hence (ii) and (iv) are correct.
For future exams
- Cookies were proposed in June 1994 by Lou Montulli of Netscape Communications. The name comes from the Unix term 'magic cookie'.
- Types: session cookies (deleted when the browser closes), persistent cookies (stay until an expiry date), first-party and third-party cookies (third-party cookies enable cross-site ad tracking), and Secure and HttpOnly cookies (protection against interception and cross-site scripting).
- Zombie (super) cookies recreate themselves after deletion and are a privacy threat.
- Cookie-consent banners grew from the EU's ePrivacy Directive and GDPR. In India, the Digital Personal Data Protection Act, 2023 requires consent for processing personal data.
- Related terms: cache (stored copies of web pages), and malware types such as virus, worm, Trojan and ransomware, which are executable code, unlike cookies.
Micro topic Internet cookiesChapter IT & Emerging Tech
Official question papers
From the SuchitraACS PYQ analysis
What 500 APSC Prelims questions show
The Assam section decides the paper.
157 of the 500 questions (31%) were on Assam: never fewer than 26 in a paper, and as many as 39 in 2023. Assam History alone gave 44 questions, which makes it the third-largest subject of the whole paper.
Five subjects make up almost half the paper.
Polity (57), Science & Tech (45), Assam History (44), Economy (43), Environment (42): together 231 of 500 questions (46%). If these five are strong, you start every paper from a strong base.
42 chapters gave 269 questions.
The must-do chapters are about a quarter of the 160 chapters, yet they gave 54% of all questions. Revise them first, and revise them again in the last week.
The paper has become harder since 2020.
In 2020, 52 questions were Easy and only 3 were Tough. In the four papers since then, the Tough questions were 22, 17, 30, 20, and the Easy ones were never more than 32. Plan for a paper where safe marks have to be earned.
Assam questions are tougher than General ones.
46 of the 157 Assam questions (29%) were Tough, against 46 of the 343 General questions (13%). In Assam History, 16 of 44 were Tough. The Assam section rewards depth: names, dates, places and districts, not headlines.
Current affairs is a steady quarter, hidden inside the static subjects.
122 questions (24%) were based on current affairs, between 22 and 27 in every paper. Only 13 of them sit under the subject "Current Affairs". The rest came through Economy (15), International Relations (15), Assam GK (14), Science & Tech (11), Polity (10). Read the news subject by subject.
Statement and matching questions are now the normal format.
Questions built on numbered statements or pairs: 3, 61, 71, 42, 43 across the five papers. Match-the-list questions: 1, 10, 18, 11, 19. One-line factual questions ruled 2020; since 2022 you need to judge every statement, so practise elimination.
Science means Physics and everyday applications.
Physics gave 17 of the 45 Science & Tech questions and was asked in all 5 papers. Science is also the kindest big subject: 20 of its 45 questions were Easy and only 3 Tough. These are marks you should not lose.
Economy can swing sharply, so keep it ready.
Economy gave 5, 6, 9, 16, 7 questions in the five papers, jumping to 16 in 2024. Budget & Fiscal Policy is its most-asked chapter. Read the Union Budget, the Assam Budget and the Economic Survey of the examination year.
Culture and ancient history are rising; modern history is falling.
Art & Culture: 0, 0, 3, 1, 6. Ancient History: 1, 2, 0, 0, 4. Modern History: 8, 4, 4, 0, 2. Medieval History gave only 2 questions in five papers. Do not drop any of them, but give your time in this order.
One more: 202 questions (40%) also test a second subject. A question on a tiger reserve is Environment and Mapping at once. Follow the "Also relates to" links while you revise.
FAQ
APSC Prelims PYQs: questions students ask
Which paper is the APSC Prelims 2026 question paper?
The CCE 2025 Prelims, held in July 2026, is the paper students call the 2026 question paper. All its 100 questions are here with answers and explanations: choose 2025 under Paper. The official PDF is on our APSC Prelims 2026 question paper page.
Which APSC Prelims papers are included?
General Studies Paper I of CCE 2020, 2022, 2023, 2024 and 2025: 100 questions from each paper, 500 in all. CSAT (Paper II) is not included.
Are the answers official?
Answers follow the official APSC final answer key. 41 questions also carry an answer-key note: where the key itself was wrong, the question had an error, grace marks were given or a fact has changed since the exam, the note under the answer explains it.
Who wrote the explanations?
They come from the SuchitraACS APSC Prelims PYQ Analysis 2020-2025 by Amit Sir. If you find a mistake, tap "Report an error" under that question and it reaches us on WhatsApp.
Is it free, and where is my progress saved?
It is free and needs no sign-up. Your answers in Practise and your saved questions stay only in this browser on this device; nobody else can see them. Clearing browser data or changing phone resets them, and you can clear them yourself from the progress bar.
Can I download the question papers as PDF?
Yes. The official papers are free PDFs: the APSC Prelims 2026 question paper (CCE 2025) and the APSC Prelims papers of 2020 to 2024.
All 500 questions as a PDF bookAPSC Prelims PYQ Book 2020-2025 (Full + Practice Edition)₹199 · free 30-page sampleSee the book
From the team behind these explanationsAPSC Prelims Crash Course 2027 (GS + CSAT)₹5,999
From the team behind these explanationsAPSC CCE Foundation Programme₹24,999
From the team behind these explanationsAPSC CCE Study Materials Package (Prelims + Mains)₹4,999
From the team behind these explanationsAPSC Mains Mentorship Programme (MMP)₹9,999
From the team behind these explanationsAPSC Mains GS Paper V (Assam Section) Course₹1,999
From the team behind these explanationsAPSC Mains Mock Test Series₹4,999
From the team behind these explanationsAPSC CCE Mains E-Study Materials₹3,999
From the team behind these explanationsAPSC Mains GS Paper IV (Ethics) Mastery Programme₹1,999
From the team behind these explanationsAPSC Mains Essay Mastery Programme₹1,999 