New batchesJob or full-time? One course for bothNew: Prelims PYQ Book ₹199Free: 500 Prelims PYQs with explanationsJob + APSC? Evening classes, 7 to 9 PMEvery class recorded, rewatch anytimePrelims + Mains + Interview, one batchPrelims only? Crash Course from ₹2,499Join now

Free for every APSC aspirant · no sign-up

APSC Prelims PYQ Explorer Previous year questions with answers, CCE 2020 to 2025

All 500 questions of the last five APSC Prelims General Studies papers, including the 2026 question paper (CCE 2025), each with the answer and a full explanation. Tap a number below to browse, or pick a subject, chapter, year or level, then read or practise.

All 500 questions

The 5 papers, 100 questions each

PaperOn AssamCurrent affairsTough
CCE 2025held in 2026282220
CCE 2024362330
CCE 2023392717
CCE 2022282722
CCE 202026233

Tap a paper to see its questions. Official PDFs: 2026 question paper (CCE 2025) and papers of 2020 to 2024.

The 22 subjects, most asked first

The 160 chapters, subject by subject

Tap a subject to see its chapters. High, Medium and Low are the chapter priorities from the SuchitraACS PYQ analysis.

Polity21 chapters · 57 Qs
Science & Tech9 chapters · 45 Qs
Assam History8 chapters · 44 Qs
Economy13 chapters · 43 Qs
Environment14 chapters · 42 Qs
Assam GK8 chapters · 30 Qs
Geography13 chapters · 26 Qs
Social Justice5 chapters · 24 Qs

The Assam section

157 of 500 questions (31%) were on Assam.

Show all 157 Assam questions

45 questions

CCE 2025 Q17Science & TechEasyCurrent affairs

'Direct Air Capture' is an emerging technology. Which of the following is true about 'Direct Air Capture'?

  1. AIt is a technology used to segregate carbon dioxide (CO2) from the atmosphere for storage or other use
  2. BThis technology enables us to capture CO2 from atmosphere and release it into the ocean
  3. CThis technology enables to chemically break down CO2 from captured air into carbon and oxygen
  4. DNone of the above
Show answer and explanationHide answer

Answer(A) It is a technology used to segregate carbon dioxide (CO2) from the atmosphere for storage or other use

Explanation

  • Direct Air Capture (DAC) uses chemical or physical processes to pull CO2 directly out of ambient air. Ordinary carbon capture works only at point sources such as power-plant chimneys.
  • Air is drawn through liquid solvents (for example, amine or sodium hydroxide solutions) or through solid sorbents that bind CO2. The sorbent is then heated, or heated under vacuum, to release a concentrated CO2 stream.
  • The CO2 can be stored permanently underground, which is called direct air carbon capture and storage (DACCS), a negative-emission technology. It can also be used in synthetic fuels, building materials, beverages and other products.
  • Option (B) is wrong: DAC does not dump CO2 into the ocean. Ocean disposal would worsen ocean acidification, and storage is in geological formations.
  • Option (C) is wrong: DAC separates CO2 molecules. It does not split them into carbon and oxygen, which would require enormous energy.
  • Option (D) is wrong because (A) is correct.

For future exams

  • Climeworks' Orca plant in Iceland (2021) was the first large-scale DAC plant. It is run on geothermal power and stores CO2 with Carbfix, which injects it into basalt rock where it mineralises.
  • Climeworks' Mammoth plant in Iceland began operating in May 2024 with a design capacity of 36,000 tonnes of CO2 a year. It was described as the world's largest DAC plant at that time.
  • Occidental Petroleum bought Carbon Engineering, a DAC company, in 2023 and is building the Stratos DAC project in Texas.
  • DAC is a form of Carbon Dioxide Removal (CDR), which also includes afforestation, biochar, enhanced rock weathering and bioenergy with carbon capture and storage (BECCS).
  • DAC is still expensive, often several hundred dollars or more per tonne of CO2, and uses a lot of energy.

Micro topic Direct Air CaptureChapter IT & Emerging TechAlso relates to Environment

CCE 2025 Q19Science & TechMediumCurrent affairs

Consider the following statements about quantum computer (quantum computing):

  1. 1.It is a rapidly advancing field that uses quantum mechanics to process information using 'qubits' instead of binary bits.
  2. 2.Many computer giants in the world are competing to produce working models of quantum computers.
  3. 3.'Majorana 1' by Microsoft is the world's first quantum processor powered by topological qubits.

Select the correct answer using the codes given below.

  1. A1 only
  2. B1 and 2 only
  3. C1, 2 and 3
  4. DNone of the above
Show answer and explanationHide answer

Answer(C) 1, 2 and 3

Explanation

  • Statement 1 is correct: Quantum computing uses quantum-mechanical principles, mainly superposition, entanglement and interference. It processes information in qubits, which can exist in a combination of 0 and 1 at once. Classical binary bits are either 0 or 1.
  • Statement 2 is correct: Many technology companies are racing to build working, scalable quantum computers. Examples include IBM, Google (Willow chip), Microsoft, Amazon (Ocelot chip), Intel and Quantinuum, alongside national missions in the USA, China, the EU and India.
  • Statement 3 is correct: On 19 February 2025, Microsoft unveiled Majorana 1, which it described as the world's first quantum chip powered by a 'Topological Core' architecture. The chip uses a new 'topoconductor' made of indium arsenide and aluminium to create Majorana-based topological qubits. It currently holds eight qubits, and the design is meant to scale to a million qubits on a single chip.

For future exams

  • The Majorana 1 results were published alongside a paper in Nature. Some physicists still question whether true topological qubits have been shown, so the 'first' is Microsoft's own claim.
  • India's National Quantum Mission was approved in April 2023 with an outlay of about Rs 6,003 crore for 2023–24 to 2030–31. It aims to build intermediate-scale quantum computers with 50–1,000 physical qubits within eight years.
  • Google announced its Willow chip in December 2024, and Amazon announced Ocelot in February 2025.
  • The UN declared 2025 the International Year of Quantum Science and Technology.
  • The term 'quantum supremacy' was popularised by Google's Sycamore experiment in 2019.

Micro topic Quantum computing – Majorana 1Chapter IT & Emerging Tech

CCE 2025 Q92Science & TechMedium

Consider the following statements about LPG (Liquefied Petroleum Gas):

  1. 1.It consists mainly of methane.
  2. 2.Ethyl mercaptan is added to it for leak detection.
  3. 3.It burns with a blue flame.

Select the correct answer using the codes given below.

  1. A1 and 2 only
  2. B2 and 3 only
  3. C1 and 3 only
  4. D1, 2 and 3
Show answer and explanationHide answer

Answer(B) 2 and 3 only

Explanation

  • Statement 1 is incorrect: LPG consists mainly of propane and butane (in India, domestic LPG is a mixture of these two). Methane is the main constituent of natural gas (CNG) and biogas.
  • Statement 2 is correct: LPG is odourless, so a strong-smelling sulphur compound, ethyl mercaptan (ethanethiol, C2H5SH), is added so that leaks can be detected by smell.
  • Statement 3 is correct: LPG burns with a clean blue flame (complete combustion), giving high heat with little smoke or soot, which is why it is a preferred domestic fuel.

Since only statements 2 and 3 are correct, the answer is (B).

For future exams

  • LPG is stored as a liquid under pressure; the gas is heavier than air, so leaked LPG collects near the floor.
  • NCERT (Class 8) gives the calorific value of LPG as about 55,000 kJ/kg, among the highest of common fuels.
  • CNG (compressed natural gas) is mainly methane and is used as a cleaner transport fuel.
  • A yellow or orange flame indicates incomplete combustion, which produces soot and carbon monoxide.
  • Pradhan Mantri Ujjwala Yojana (PMUY), launched on 1 May 2016 from Ballia (Uttar Pradesh), gives LPG connections to women of poor households.

Micro topic LPGChapter Chemistry

CCE 2025 Q93Science & TechEasy

Which of the following are the applications of 'Ultrasonic waves'?

  1. 1.Cleaning parts located in hard-to-reach places
  2. 2.Detecting cracks and flaws in metal blocks
  3. 3.Echocardiography

Select the correct answer using the codes given below.

  1. A1 and 2 only
  2. B2 and 3 only
  3. C1 and 3 only
  4. D1, 2 and 3
Show answer and explanationHide answer

Answer(D) 1, 2 and 3

Explanation

Ultrasonic waves (ultrasound) are sound waves with frequency above 20 kHz, beyond the upper limit of human hearing. They have high energy and can travel along well-defined paths even in the presence of obstacles. NCERT (Class 9, 'Sound') lists all three uses given:

  • Statement 1 is correct: objects with hard-to-reach parts (spiral tubes, odd-shaped parts, electronic components) are placed in a cleaning solution and ultrasonic waves are passed through it; the high-frequency vibrations detach dust, grease and dirt.
  • Statement 2 is correct: ultrasound is passed through metal blocks; a crack or flaw reflects the waves back, revealing defects that are invisible from outside (used in construction of bridges, buildings, machines).
  • Statement 3 is correct: in echocardiography, ultrasonic waves are reflected from different parts of the heart to form an image of the heart.

Hence all three are applications.

For future exams

  • Human audible range: 20 Hz to 20 kHz; sound below 20 Hz is infrasound (produced by whales, elephants, earthquakes).
  • Ultrasonography is used to image internal organs and to monitor the foetus during pregnancy.
  • Ultrasound is used to break small kidney stones into fine grains (lithotripsy).
  • SONAR (Sound Navigation and Ranging) uses ultrasonic waves to find the depth of the sea and locate submarines and shoals of fish.
  • Bats, dolphins and porpoises use ultrasound for echolocation.

Micro topic Ultrasonic wavesChapter Physics

CCE 2025 Q94Science & TechMedium

Which of the following is/are the reason(s) for using 'mercury' in thermometers?

  1. 1.It does not stick to the glass tube.
  2. 2.It is a good conductor of heat.
  3. 3.It is opaque and shining.
  4. 4.It has a high boiling point.

Select the correct answer using the codes given below.

  1. A1 and 2 only
  2. B2 and 3 only
  3. C1, 2, 3 and 4
  4. D4 only
Show answer and explanationHide answer

Answer(C) 1, 2, 3 and 4

Explanation

Mercury is used in thermometers for several reasons, and all four given are valid:

  • Statement 1 is correct: mercury does not wet or stick to glass, so the thread moves freely and the reading is accurate.
  • Statement 2 is correct: mercury is a good conductor of heat, so it quickly attains the temperature of the body or substance being measured.
  • Statement 3 is correct: it is opaque and shining, so the mercury thread is easily seen in the narrow capillary tube.
  • Statement 4 is correct: it has a high boiling point (about 357 °C) and a low freezing point (about –39 °C), so it stays liquid over a wide range of temperatures.

Other reasons: it expands uniformly with temperature and has a low specific heat capacity, so it absorbs little heat and responds quickly.

For future exams

  • Mercury is the only metal that is liquid at room temperature.
  • Alcohol thermometers are used for very low temperatures, because alcohol freezes at a much lower temperature than mercury.
  • A clinical thermometer reads from 35 °C to 42 °C; normal human body temperature is 37 °C (98.6 °F) (NCERT Class 7).
  • The Minamata Convention on Mercury (adopted 2013, in force since 16 August 2017) aims to phase out mercury-added products such as thermometers; India ratified it in 2018.
  • Minamata disease (Japan) was caused by methylmercury in industrial effluent.

Micro topic Mercury in thermometersChapter Physics

CCE 2025 Q95Science & TechEasy

Semiconductors are the foundation of

  1. Acomputers and smartphones, integrated circuits (chips), electric bulbs, torch batteries
  2. Bcomputers and smartphones, integrated circuits (chips), transistors, solar bulbs, LEDs
  3. Ccomputer and smartphones, gramophone records, water filter candles
  4. Dintegrated circuits (chips), corrugated roof panels, metal detectors
Show answer and explanationHide answer

Answer(B) computers and smartphones, integrated circuits (chips), transistors, solar bulbs, LEDs

Explanation

Semiconductors (such as silicon and germanium) have electrical conductivity between that of conductors and insulators, and it can be controlled by doping, light or temperature. They form the basis of transistors and diodes, which are packed by the billions into integrated circuits (chips) used in computers and smartphones. Light-emitting diodes (LEDs) are semiconductor p-n junctions, and solar (photovoltaic) cells that charge solar bulbs are also made of semiconductors. Every item in option (B) depends on semiconductors.

  • Option (A) is incorrect: an ordinary electric bulb works by heating a tungsten filament, and a torch battery is an electrochemical cell; neither is based on semiconductors.
  • Option (C) is incorrect: gramophone records (grooves on vinyl) and water-filter candles (ceramic) are not semiconductor devices.
  • Option (D) is incorrect: corrugated roof panels are not semiconductor devices.

For future exams

  • Doping: adding pentavalent impurities (phosphorus, arsenic, antimony) gives n-type, and trivalent impurities (boron, aluminium, gallium, indium) gives p-type semiconductors.
  • The India Semiconductor Mission (ISM) has an outlay of Rs 76,000 crore to build chip fabrication, display and assembly/testing units.
  • Assam: Tata's semiconductor assembly and test (OSAT) unit at Jagiroad (Morigaon district), with investment of about Rs 27,000 crore and planned capacity of 48 million chips a day.
  • Silicon is the most widely used semiconductor; gallium arsenide is used in LEDs and high-speed electronics.

Micro topic SemiconductorsChapter Physics

CCE 2025 Q96Science & TechMedium

The refractive index of ice is 1.31 and that of water is 1.33.

Which of the following statements is in agreement of the above data?

  1. 1.The speed of light is greater in ice than in water.
  2. 2.The speed of light is same in ice and water.
  3. 3.The ratio of speed of light in air and that in water is equal to 1.33.
  4. 4.The speed of light in air is 1.31 times the speed of light in ice.

Select the correct answer using the codes given below.

  1. A1 and 3 only
  2. B2 and 3
  3. C1, 3 and 4 only
  4. D3 and 4 only
Show answer and explanationHide answer

Answer(C) 1, 3 and 4 only

Explanation

Absolute refractive index n = speed of light in vacuum (or, approximately, air) / speed of light in the medium. So the larger the refractive index, the lower the speed of light in that medium.

  • Statement 1 is correct: n(ice) = 1.31 is less than n(water) = 1.33, so light travels faster in ice than in water.
  • Statement 2 is incorrect: since the refractive indices differ, the speeds cannot be the same.
  • Statement 3 is correct: n(water) = speed in air / speed in water = 1.33 (taking the refractive index of air as about 1).
  • Statement 4 is correct: n(ice) = speed in air / speed in ice = 1.31, so the speed of light in air is 1.31 times that in ice.

Therefore statements 1, 3 and 4 agree with the data.

For future exams

  • Speed of light in vacuum is about 3 × 10^8 m/s; in water it is about 2.25 × 10^8 m/s.
  • Optical density is different from mass density: a medium with higher refractive index is optically denser.
  • Light bends towards the normal when it goes from an optically rarer to a denser medium (Snell's law: sin i / sin r = constant).
  • NCERT values of refractive index: water 1.33, crown glass 1.52, diamond 2.42 (highest among common substances), ice 1.31.
  • Total internal reflection, the basis of optical fibres and sparkling of diamonds, occurs when light goes from denser to rarer medium at an angle greater than the critical angle.

Micro topic Refractive indexChapter Physics

CCE 2025 Q98Science & TechEasy

The mass of an object is 6 kg. What would be its weight when measured on the surface of the Moon?

  1. A9.8 N
  2. B6 N
  3. C58.8 N
  4. D15.8 N
Show answer and explanationHide answer

Answer(A) 9.8 N

Explanation

Mass is the amount of matter in a body and stays the same everywhere, so the mass on the Moon remains 6 kg. Weight is the force of gravity on the body (W = mg). The acceleration due to gravity on the Moon is about one-sixth of that on Earth.

Weight on Earth = 6 kg × 9.8 m/s² = 58.8 N.

Weight on the Moon = 58.8 N ÷ 6 = 9.8 N.

  • Option (B) 6 N is incorrect: it confuses the mass value (6 kg) with weight.
  • Option (C) 58.8 N is incorrect: this is the weight on Earth, not on the Moon.
  • Option (D) 15.8 N is incorrect: it does not follow from the one-sixth relation.

For future exams

  • Acceleration due to gravity on the Moon is about 1.6 m/s², roughly one-sixth of Earth's 9.8 m/s² (NCERT Class 9, 'Gravitation').
  • The SI unit of weight is the newton (N); 1 kg-wt = 9.8 N.
  • Mass is measured with a beam (physical) balance and does not change from place to place; weight is measured with a spring balance and varies.
  • g on Earth is greatest at the poles and least at the equator, and is zero at the centre of the Earth.
  • Newton's universal law of gravitation: F = G m1 m2 / r², with G = 6.674 × 10^-11 N m²/kg².

Micro topic Weight on the MoonChapter Physics

CCE 2025 Q99Science & TechEasy

Oozing of water droplets from tips or edges of leaves, usually at night, is called

  1. Atranspiration
  2. Bguttation
  3. Cdiffusion
  4. Devaporation
Show answer and explanationHide answer

Answer(B) guttation

Explanation

Guttation is the loss of water in liquid form, as droplets, from special openings called hydathodes at the tips or margins of leaves. It happens mainly at night and in the early morning, when transpiration is low and the soil is moist, because root pressure pushes water up the xylem and the excess is forced out (NCERT Class 11 Biology, 'Transport in Plants'). It is commonly seen at the tips of grass blades and in many herbaceous plants.

  • Option (A) transpiration is incorrect: it is loss of water as vapour, mainly through stomata, largely during the day.
  • Option (C) diffusion is incorrect: it is passive movement of molecules from higher to lower concentration, not oozing of droplets.
  • Option (D) evaporation is incorrect: it is the change of liquid water into vapour from any surface; guttation is loss of liquid water.

For future exams

  • Hydathodes are always open, unlike stomata, which are regulated by guard cells.
  • Root pressure is a positive pressure developed in the xylem by active absorption of ions by roots; guttation is visible evidence of it.
  • The main force for the upward movement of water in tall trees is transpiration pull (cohesion–tension theory), not root pressure.
  • Guttation fluid contains dissolved salts and sugars, which may leave a crust on leaf tips after drying.
  • Bleeding or exudation from cut stems is another sign of root pressure.

Micro topic GuttationChapter Biology

CCE 2025 Q100Science & TechMediumCurrent affairs

Which of the following statements are best related to LACHIT-1?

  1. 1.It is an AI-based drone interceptor.
  2. 2.It was a satellite launched abroad PSLV-C62 mission.
  3. 3.It was a student-developed experimental satellite built in Assam.
  4. 4.It is a supercomputer installed in IIT, Guwahati.

Select the correct answer using the codes given below.

  1. A1 and 2
  2. B1 and 3
  3. C2 and 3
  4. D3 and 4
Show answer and explanationHide answer

Answer(C) 2 and 3

Explanation

  • Statement 1 is incorrect: LACHIT-1 is a satellite, not an AI-based drone interceptor.
  • Statement 2 is correct: LACHIT-1 was flown aboard ISRO's PSLV-C62 mission, launched from Satish Dhawan Space Centre, Sriharikota, on 12 January 2026, as part of Dhruva Space's Polar Access-1 rideshare. The primary payload was the earth observation satellite EOS-N1.
  • Statement 3 is correct: it was built by about 50 students of Assam Don Bosco University (ADBU), Guwahati, with students and faculty from other North-Eastern states, under Dhruva Space's ASTRA for Academia programme. It was described as the North-East's first satellite – a store-and-forward amateur radio communication satellite.
  • Statement 4 is incorrect: it is not a supercomputer at IIT Guwahati.

Hence statements 2 and 3 are correct. Note that the PSLV-C62 mission failed: ISRO reported a deviation near the end of the third stage, and the satellites, including LACHIT-1, did not reach orbit.

For future exams

  • LACHIT stands for 'Live Amateur Communication Hub for Innovative Technologies – One'; it is named after the Ahom general Lachit Borphukan.
  • Preparatory work on LACHIT-1 began at ADBU in 2022; it was built on Dhruva Space's P-DoT platform, with the National Institute of Amateur Radio as a collaborator.
  • PSLV-C62 was the second consecutive PSLV failure after PSLV-C61 (EOS-09, 18 May 2025), which also failed in its third stage.
  • The only payload reported to have survived and sent data was the Spanish start-up Orbital Paradigm's re-entry capsule KID (Kestrel Initial Demonstrator).
  • Another co-passenger was AayulSAT of Bengaluru-based OrbitAID Aerospace, meant for an on-orbit refuelling experiment.

Micro topic LACHIT-1 satelliteChapter SpaceAlso relates to Assam GK

CCE 2024 Q51Science & TechMediumCurrent affairs

List–I gives the names of satellites launched by ISRO and List–II gives the names of the types of satellites. Match List–I with List–II:

List–I (Names of satellites)List–II (Types of satellites)
a. RISAT-2BR21. Meteorological
b. Megha-Tropiques 22. Earth observation
c. AstroSat3. Solar coronal observation
d. Aditya-L14. Study high-energy processes in binary star system

Select the correct answer using the codes given below.

  1. Aa-2, b-1, c-4, d-3
  2. Ba-1, b-2, c-3, d-4
  3. Ca-4, b-3, c-2, d-1
  4. Da-3, b-4, c-1, d-2
Show answer and explanationHide answer

Answer(A) a-2, b-1, c-4, d-3

Explanation

  • a. RISAT-2BR2 – Earth observation (2): An X-band Synthetic Aperture Radar (SAR) imaging satellite of the RISAT series; it was renamed EOS-01 under ISRO's new naming scheme and launched by PSLV-C49 on 7 November 2020 for agriculture, forestry and disaster monitoring.
  • b. Megha-Tropiques – Meteorological (1): An ISRO–CNES (France) mission launched in October 2011 to study the water cycle and energy exchanges in the tropical atmosphere ('Megha' is Sanskrit for cloud). Note: only one Megha-Tropiques satellite was ever launched; the '2' in the question does not correspond to a launched satellite, but the intended type is clearly meteorological.
  • c. AstroSat – Study of high-energy processes in binary star systems (4): India's first dedicated multi-wavelength space observatory (launched 28 September 2015); its first stated objective is to understand high-energy processes in binary star systems containing neutron stars and black holes.
  • d. Aditya-L1 – Solar coronal observation (3): India's first space-based solar mission, placed in a halo orbit around Lagrange point L1; its main payload, the Visible Emission Line Coronagraph (VELC), studies the solar corona.

Only code (A) gives a-2, b-1, c-4, d-3, so (A) is correct.

For future exams

  • Aditya-L1 was launched by PSLV-C57 on 2 September 2023 and inserted into its halo orbit around L1 (about 1.5 million km from Earth) on 6 January 2024; it carries seven payloads.
  • AstroSat carries five payloads, including the Ultraviolet Imaging Telescope (UVIT) and the Large Area X-ray Proportional Counter (LAXPC); it has worked far beyond its designed 5-year life.
  • Megha-Tropiques ended operations in 2021 and was deorbited through a controlled re-entry on 7 March 2023.
  • Under ISRO's EOS naming system (2020), Earth observation satellites are named EOS-xx; for example, RISAT-2BR2 became EOS-01.
  • SAR (radar) satellites like RISAT can image through clouds and at night, unlike optical satellites.

Micro topic ISRO satellites and their typesChapter Space

CCE 2024 Q52Science & TechTough

Nanomaterials are usually considered to be materials with at least one external dimension that measures 100 nanometres or less. Consider the following statements regarding nanomaterials:

  1. (i)They are toxic and carcinogenic.
  2. (ii)Graphene is a well-known nanomaterial.
  3. (iii)Nanoscale titanium dioxide can be used in sunscreen lotion.
  4. (iv)Paints made from nano gold do not fade with time.

Which of the above statements are correct?

  1. A(ii) and (iii) only
  2. B(i) and (iv) only
  3. C(i), (iii) and (iv) only
  4. DAll the statements are correct
Show answer and explanationHide answer

Answer(D) All the statements are correct

Explanation

  • Statement (i) is treated as correct: because of their tiny size and very large surface area, many nanoparticles can enter cells and cause inflammation and other toxic effects, and some are suspected carcinogens. For example, the IARC classifies inhaled titanium dioxide dust as Group 2B, 'possibly carcinogenic to humans'. Strictly, not every nanomaterial is toxic or carcinogenic, but the examiner accepted this as a general concern.
  • Statement (ii) is correct: graphene is a single, one-atom-thick layer of carbon atoms arranged in a hexagonal (honeycomb) lattice, a classic two-dimensional nanomaterial. It was isolated in 2004 by Andre Geim and Konstantin Novoselov, who shared the 2010 Nobel Prize in Physics.
  • Statement (iii) is correct: ultrafine (nano) titanium dioxide, often combined with nano zinc oxide, is used in sunscreens to block UV rays while remaining transparent on the skin.
  • Statement (iv) is correct: colour from gold nanoparticles comes from the interaction of light with the particles (surface plasmon resonance), not from dye molecules that break down in light. Gold is chemically inert, so such colours are very durable; the red of old stained glass, coloured by gold nanoparticles, has lasted for centuries.

Since all four are accepted as correct, the answer is (D).

For future exams

  • The Lycurgus Cup, a 4th-century Roman glass cup, looks green in reflected light and red when lit from behind, because of gold and silver nanoparticles (about 70 nm) in the glass.
  • Nanotechnology deals with matter having at least one dimension between 1 and 100 nanometres (1 nm = 10^-9 m). Richard Feynman's 1959 talk 'There's Plenty of Room at the Bottom' first set out its ideas.
  • Fullerenes (C60, 'buckyballs') were discovered in 1985 by Kroto, Smalley and Curl, who shared the 1996 Nobel Prize in Chemistry. Carbon nanotubes are another carbon nanomaterial.
  • The European Union withdrew approval for titanium dioxide (E171) as a food additive from 7 February 2022, citing possible genotoxicity of its nanoparticles.

Micro topic NanomaterialsChapter IT & Emerging Tech

CCE 2024 Q53Science & TechMedium

Consider the following statements:

  1. (i)Initially, ITER was called Indian Thermonuclear Experimental Reactor.
  2. (ii)ITER is a nuclear fusion research and engineering megaproject.
  3. (iii)ITER is a nuclear fission research and engineering megaproject.
  4. (iv)ITER means ‘the way’ or ‘the path’ in Latin.

Which of the above statements is/are correct?

  1. A(i) only
  2. B(ii) only
  3. C(ii) and (iii) only
  4. D(ii) and (iv) only
Show answer and explanationHide answer

Answer(D) (ii) and (iv) only

Explanation

  • Statement (i) is incorrect: ITER was originally an acronym for 'International Thermonuclear Experimental Reactor', not 'Indian'. India is only one of its seven members. Today the name is used simply as ITER.
  • Statement (ii) is correct: ITER is an international nuclear fusion research and engineering megaproject. It is building the world's largest tokamak to show that fusion (joining light nuclei of hydrogen isotopes deuterium and tritium) can be a large-scale, carbon-free energy source.
  • Statement (iii) is incorrect: ITER is about fusion, not fission. Fission (splitting heavy nuclei like uranium-235) is used in present-day nuclear power plants.
  • Statement (iv) is correct: 'Iter' is the Latin word for 'the way' or 'the path'.

Hence only (ii) and (iv) are correct.

For future exams

  • ITER members: China, the European Union, India, Japan, South Korea, Russia and the United States. India joined in December 2005; the ITER Agreement was signed in 2006.
  • Site: Saint-Paul-lez-Durance (Cadarache), southern France.
  • ITER-India, under the Institute for Plasma Research (IPR), Gandhinagar, Department of Atomic Energy, is India's domestic agency; India supplied the cryostat, the largest stainless steel vacuum vessel of its kind.
  • Under the revised baseline (2024), full magnetic energy is planned for 2036 and deuterium-tritium operation for 2039.
  • ITER aims at Q = 10, i.e. 500 MW of fusion power from 50 MW of input heating power.
  • India's own tokamaks: Aditya (1989) and SST-1 (Steady State Superconducting Tokamak) at IPR.

Micro topic ITERChapter Nuclear & Energy TechAlso relates to International Relations

CCE 2024 Q54Science & TechMediumCurrent affairs

Consider the following statements:

  1. (i)Particular messenger RNA (mRNA) molecules, which are smaller than their average size, are called microRNA (miRNA).
  2. (ii)miRNA are small, single-stranded, non-coding RNA molecules.
  3. (iii)miRNA molecules play a crucial role in gene regulation.
  4. (iv)People knew about miRNA since the early 1980s.

Which of the above statements are correct?

  1. A(i) and (ii) only
  2. B(ii) and (iii) only
  3. C(i) and (iv) only
  4. D(ii) and (iv) only
Show answer and explanationHide answer

Answer(B) (ii) and (iii) only

Explanation

  • Statement (i) is incorrect: microRNAs are not small messenger RNAs. mRNA carries the code for making proteins, whereas miRNA is a distinct class of tiny non-coding RNA (about 21–23 nucleotides) that does not code for any protein.
  • Statement (ii) is correct: miRNAs are small, single-stranded, non-coding RNA molecules.
  • Statement (iii) is correct: miRNAs regulate genes after transcription (post-transcriptional gene regulation). They bind to complementary sequences on target mRNAs and block their translation or cause their breakdown, thereby switching down production of specific proteins.
  • Statement (iv) is incorrect: The first miRNA, lin-4, was discovered in 1993 in the roundworm Caenorhabditis elegans by Victor Ambros and Gary Ruvkun (results published back to back in the journal Cell). So miRNAs were not known in the early 1980s.

Hence only (ii) and (iii) are correct.

For future exams

  • The 2024 Nobel Prize in Physiology or Medicine was awarded to Victor Ambros and Gary Ruvkun 'for the discovery of microRNA and its role in post-transcriptional gene regulation'.
  • lin-4 miRNA was found to bind lin-14 mRNA and stop it from being translated.
  • In 2000, Ruvkun's group found a second miRNA, let-7, which is conserved across the animal kingdom, including humans; this showed miRNA regulation is universal.
  • The human genome is estimated to have more than 1,000 miRNA genes; abnormal miRNA regulation is linked to cancers and other diseases.
  • Related: the 2006 Nobel (Fire and Mello) was for RNA interference (RNAi) by double-stranded RNA; the 2023 Nobel (Karikó and Weissman) was for nucleoside base modifications enabling mRNA vaccines.

Micro topic microRNA (Nobel 2024)Chapter Biotechnology

CCE 2024 Q55Science & TechMedium

Consider the following statements:

  1. (i)Indian scientist Satyendra Nath Bose developed the foundation of a quantum statistics called Bose-Einstein statistics.
  2. (ii)A class of elementary subatomic particles called boson was named after Satyendra Nath Bose by P. A. M. Dirac.
  3. (iii)Einstein used Satyendra Nath Bose’s radical ideas to develop the theory of a phenomenon called Bose-Einstein condensate.
  4. (iv)Satyendra Nath Bose was awarded India’s second highest civilian award, the Padma Vibhushan.

Which of the above statements are correct?

  1. AAll the statements are correct
  2. B(i), (ii) and (iii) only
  3. C(ii) and (iii) only
  4. D(i), (iii) and (iv) only
Show answer and explanationHide answer

Answer(A) All the statements are correct

Explanation

  • Statement (i) is correct: In 1924, while teaching at Dhaka University, S. N. Bose derived Planck's radiation law by treating light quanta (photons) as indistinguishable particles. Einstein extended the idea, and the method became Bose–Einstein statistics, a foundation of quantum statistics.
  • Statement (ii) is correct: Particles that obey Bose–Einstein statistics (integer spin, e.g. photons, gluons, the Higgs boson) are called bosons; the name was given by the British physicist Paul Dirac in honour of Bose.
  • Statement (iii) is correct: Einstein applied Bose's ideas to atoms and in 1924–25 predicted that at temperatures near absolute zero, many atoms would crowd into the lowest energy state, forming a new state of matter: the Bose–Einstein condensate (BEC).
  • Statement (iv) is correct: The Government of India conferred the Padma Vibhushan, the country's second-highest civilian award, on Bose in 1954.

All four statements are true, so the answer is (A).

For future exams

  • Bose sent his paper on Planck's law to Einstein, who translated it into German and had it published in Zeitschrift für Physik (1924).
  • BEC was first created in a laboratory in 1995 by Eric Cornell and Carl Wieman (and independently Wolfgang Ketterle), who won the 2001 Nobel Prize in Physics.
  • Bose was elected Fellow of the Royal Society in 1958 and was made a National Professor; he was also nominated to the Rajya Sabha.
  • The S. N. Bose National Centre for Basic Sciences, Kolkata (1986), is named after him.
  • Particles with half-integer spin (electrons, protons, neutrons) obey Fermi–Dirac statistics and are called fermions, after Enrico Fermi.

Micro topic S. N. BoseChapter Scientists & Discoveries

CCE 2024 Q56Science & TechToughCurrent affairs

Consider the following statements:

  1. (i)Dark oxygen was discovered in 2013 by Andrew Sweetman while conducting ship-based fieldwork in the Pacific Ocean.
  2. (ii)Dark oxygen was discovered in 2013 by Andrew Sweetman while conducting research on dusty plasma in cometary tails.
  3. (iii)Dark oxygen refers to molecular oxygen that is produced in the total darkness of the very deep ocean.
  4. (iv)Dark oxygen refers to the medical oxygen cylinders, which are sold in the black market.

Which of the above statements is/are correct?

  1. A(i) only
  2. B(ii) only
  3. C(iv) only
  4. D(i) and (iii) only
Show answer and explanationHide answer

Answer(D) (i) and (iii) only

Explanation

  • Statement (i) is correct: Marine scientist Andrew Sweetman (Scottish Association for Marine Science) first recorded unexpected oxygen readings in 2013 during ship-based fieldwork in the Clarion-Clipperton Zone (CCZ) of the Pacific Ocean. Thinking his sensors were faulty, he repeated the measurements on later voyages; the findings were published in Nature Geoscience on 22 July 2024.
  • Statement (ii) is incorrect: The discovery came from deep-sea seabed experiments, not from research on dusty plasma in cometary tails.
  • Statement (iii) is correct: 'Dark oxygen' means molecular oxygen produced on the seafloor at about 4,000 m depth, in total darkness where no sunlight reaches and photosynthesis is impossible. It appears to be linked to potato-sized polymetallic nodules, which carry an electric potential (up to about 0.95 volt) that may split seawater into hydrogen and oxygen (seawater electrolysis).
  • Statement (iv) is incorrect: The term has nothing to do with medical oxygen cylinders sold in the black market.

Hence (i) and (iii) only are correct.

For future exams

  • The Clarion-Clipperton Zone lies in the Pacific between Hawaii and Mexico and is targeted for deep-sea mining of polymetallic nodules rich in manganese, nickel, cobalt and copper.
  • The finding challenges the idea that all of Earth's oxygen production needs sunlight (photosynthesis), and has strengthened concerns about deep-sea mining.
  • The International Seabed Authority (ISA), set up under UNCLOS and headquartered in Kingston, Jamaica, regulates seabed mining in international waters.
  • India holds ISA exploration contracts for polymetallic nodules in the Central Indian Ocean Basin and runs the Deep Ocean Mission (approved 2021), including the crewed submersible Matsya-6000 under 'Samudrayaan'.

Micro topic Dark oxygenChapter IT & Emerging TechAlso relates to Environment

CCE 2024 Q57Science & TechEasy

If an object undergoes a uniform circular motion, then its

  1. Aacceleration remains uniform
  2. Bvelocity changes
  3. Cspeed changes
  4. Dvelocity remains uniform
Show answer and explanationHide answer

Answer(B) velocity changes

Explanation

In uniform circular motion an object moves along a circle at constant speed. Velocity is a vector: at every point it acts along the tangent to the circle, so its direction keeps changing even though its magnitude (speed) stays the same. A change in direction is a change in velocity, so the motion is accelerated.

  • (A) is incorrect: The centripetal acceleration (a = v²/r = ω²r) has a constant magnitude but always points towards the centre, so its direction keeps changing; it is not a uniform (constant) vector.
  • (C) is incorrect: 'Uniform' circular motion means the speed is constant.
  • (D) is incorrect: Velocity cannot remain uniform because its direction changes at every instant.

For future exams

  • The net force needed for circular motion is the centripetal force, F = mv²/r, directed towards the centre (provided by tension, gravity, friction etc.).
  • Since centripetal force is always perpendicular to velocity, it does no work and the kinetic energy stays constant.
  • Angular velocity ω = 2π/T, and linear speed v = ωr.
  • 'Centrifugal force' is a pseudo (fictitious) force felt in a rotating frame of reference, directed away from the centre.
  • Examples: a satellite in circular orbit (gravity provides centripetal force), banking of roads on curves (to supply centripetal force).

Micro topic Uniform circular motionChapter Physics

CCE 2024 Q58Science & TechEasy

The tendency of a liquid drop to contract and occupy minimum area is due to

  1. Asurface tension
  2. Bviscosity
  3. Cdensity
  4. Dvapour pressure
Show answer and explanationHide answer

Answer(A) surface tension

Explanation

Molecules inside a liquid are pulled equally in all directions by neighbouring molecules, but molecules at the surface have fewer neighbours and feel a net inward pull. As a result, the surface behaves like a stretched elastic membrane and tends to contract to the smallest possible area. For a given volume, a sphere has the least surface area, so a free liquid drop becomes nearly spherical. This property is surface tension.

  • (B) is incorrect: Viscosity is internal friction that resists the relative motion of liquid layers (flow); it does not make drops contract.
  • (C) is incorrect: Density is mass per unit volume and has no role in minimising surface area.
  • (D) is incorrect: Vapour pressure is the pressure exerted by a liquid's vapour in equilibrium with it; it relates to evaporation and boiling.

For future exams

  • SI unit of surface tension: newton per metre (N/m), equivalent to joule per square metre (J/m²); it is force per unit length or surface energy per unit area.
  • Surface tension decreases as temperature rises and becomes zero at the critical temperature.
  • Soaps and detergents (surfactants) lower the surface tension of water, helping it wet and clean surfaces.
  • Effects of surface tension: water striders walking on water, rise of water in a capillary tube (capillarity), and the spherical shape of raindrops and mercury drops.
  • Hot soup tastes better partly because lower surface tension lets it spread over the tongue more easily.

Micro topic Surface tensionChapter Physics

CCE 2023 Q23Science & TechEasy

It is easier to roll a barrel than to pull it because:

  1. Athe full weight of the barrel comes into play when it is pulled
  2. Brolling friction is much less than sliding friction
  3. Cthe surface area of the barrel in contact with the road is more in case of pulling
  4. Dof a reason other than those mentioned
Show answer and explanationHide answer

Answer(B) rolling friction is much less than sliding friction

Explanation

When a barrel is rolled, only a narrow strip of it touches the ground at any moment, and that strip does not slide over the surface. The only resistance is rolling friction, which comes mainly from slight deformation of the barrel and the ground where they touch. When a barrel is pulled (dragged), its surface has to slide over the ground. Sliding friction then acts, and it is much larger than rolling friction. So it takes much less force to roll a barrel than to drag it.

  • Option (A) is incorrect: the barrel's weight presses on the ground whether it is rolled or dragged. Weight is not the reason for the difference.
  • Option (C) is incorrect: for ordinary surfaces, friction does not depend much on the area of contact. It depends on the nature of the surfaces and the normal force.
  • Option (D) is incorrect: the correct reason is given in option (B).

For future exams

  • Static friction is greater than sliding (kinetic) friction, which is greater than rolling friction. Starting to move an object therefore takes more force than keeping it moving.
  • Ball bearings and roller bearings in fans, cycles and machines replace sliding friction with rolling friction.
  • Lubricants such as oil, grease and graphite reduce friction. An air cushion, as in a hovercraft, almost removes it.
  • Fluid friction is called drag. Streamlined shapes in aircraft, ships, birds and fish reduce it.
  • Friction is a "necessary evil": it lets us walk, write and brake, but it causes wear and tear and wastes energy as heat.

Micro topic Rolling vs sliding frictionChapter Physics

CCE 2023 Q24Science & TechMediumAnswer-key note

The mass of a body is different from its weight because:

  1. (i)Mass is a variable quantity whereas weight is constant.
  2. (ii)Mass varies very little at different places, whereas weight varies a lot.
  3. (iii)Mass is constant, but weight decreases as the body moves from the Poles to the Equator.
  4. (iv)Mass is a measure of the quantity of matter, whereas weight is a force.

Select the correct reason/reasons using the codes given below:

  1. A(i) only
  2. B(ii) and (iv) only
  3. C(iii) only
  4. D(iii) and (iv) only
Show answer and explanationHide answer

Answer(D) (iii) and (iv) only – official provisional key says (B)

Answer-key note: Official key wrong

Mass does not vary with place, so statement (ii) is wrong; weight decreases slightly from the Poles (g ≈ 9.83 m/s²) to the Equator (g ≈ 9.78 m/s²), so (iii) is correct. Provisional key says B; correct answer is D ((iii) and (iv)). Check the final key.

Official key: B · Answer here: D

Explanation

  • Statement (i) is incorrect: it reverses the facts. Mass is constant, while weight (W = mg) changes from place to place.
  • Statement (ii) is incorrect: the mass of a body does not vary at all from place to place, so saying it 'varies very little' is wrong. Its weight also does not 'vary a lot' on Earth: g is about 9.78 m/s² at the Equator and about 9.83 m/s² at the Poles, so weight changes by only about 0.5%.
  • Statement (iii) is correct: mass stays the same everywhere, but g is greater at the Poles than at the Equator because the Earth bulges at the Equator (points there are farther from the centre) and because of the Earth's rotation. Weight therefore decreases as a body moves from the Poles towards the Equator.
  • Statement (iv) is correct: mass measures the quantity of matter in a body (SI unit kilogram, a scalar), while weight is the force with which the Earth attracts the body (SI unit newton, a vector).

So (iii) and (iv) correctly explain the difference, which is option (D). APSC's official provisional key gives (B), which depends on statement (ii) and is not supported by physics.

For future exams

  • Weight W = mg. A body weighs about one-sixth as much on the Moon as on Earth, but its mass does not change.
  • Astronauts in orbit feel weightless because they are in free fall, not because gravity is absent; at about 400 km height gravity is still nearly 90% of its surface value.
  • In the standard textbook (uniform-density) model, g decreases with height above the Earth's surface and with depth below it, and becomes zero at the centre.
  • A beam balance compares masses and gives the same reading everywhere. A spring balance measures weight, so its reading changes with g.
  • 1 kg-wt (kilogram-weight) is about 9.8 N.

Micro topic Mass vs weightChapter Physics

Subject-wise

APSC Prelims PYQs by subject

Each subject on its own page: how often APSC asked it in every paper, its chapters, and all its questions with answers and explanations.

Study planThe 30-day APSC Prelims PYQ planAll 500 questions in 26 days, chapter by chapter, then revision and two full papers. Tick each day as you finish it.Open the plan

From the SuchitraACS PYQ analysis

What 500 APSC Prelims questions show

  1. The Assam section decides the paper.

    157 of the 500 questions (31%) were on Assam: never fewer than 26 in a paper, and as many as 39 in 2023. Assam History alone gave 44 questions, which makes it the third-largest subject of the whole paper.

  2. Five subjects make up almost half the paper.

    Polity (57), Science & Tech (45), Assam History (44), Economy (43), Environment (42): together 231 of 500 questions (46%). If these five are strong, you start every paper from a strong base.

  3. 42 chapters gave 269 questions.

    The must-do chapters are about a quarter of the 160 chapters, yet they gave 54% of all questions. Revise them first, and revise them again in the last week.

  4. The paper has become harder since 2020.

    In 2020, 52 questions were Easy and only 3 were Tough. In the four papers since then, the Tough questions were 22, 17, 30, 20, and the Easy ones were never more than 32. Plan for a paper where safe marks have to be earned.

  5. Assam questions are tougher than General ones.

    46 of the 157 Assam questions (29%) were Tough, against 46 of the 343 General questions (13%). In Assam History, 16 of 44 were Tough. The Assam section rewards depth: names, dates, places and districts, not headlines.

  6. Current affairs is a steady quarter, hidden inside the static subjects.

    122 questions (24%) were based on current affairs, between 22 and 27 in every paper. Only 13 of them sit under the subject "Current Affairs". The rest came through Economy (15), International Relations (15), Assam GK (14), Science & Tech (11), Polity (10). Read the news subject by subject.

  7. Statement and matching questions are now the normal format.

    Questions built on numbered statements or pairs: 3, 61, 71, 42, 43 across the five papers. Match-the-list questions: 1, 10, 18, 11, 19. One-line factual questions ruled 2020; since 2022 you need to judge every statement, so practise elimination.

  8. Science means Physics and everyday applications.

    Physics gave 17 of the 45 Science & Tech questions and was asked in all 5 papers. Science is also the kindest big subject: 20 of its 45 questions were Easy and only 3 Tough. These are marks you should not lose.

  9. Economy can swing sharply, so keep it ready.

    Economy gave 5, 6, 9, 16, 7 questions in the five papers, jumping to 16 in 2024. Budget & Fiscal Policy is its most-asked chapter. Read the Union Budget, the Assam Budget and the Economic Survey of the examination year.

  10. Culture and ancient history are rising; modern history is falling.

    Art & Culture: 0, 0, 3, 1, 6. Ancient History: 1, 2, 0, 0, 4. Modern History: 8, 4, 4, 0, 2. Medieval History gave only 2 questions in five papers. Do not drop any of them, but give your time in this order.

One more: 202 questions (40%) also test a second subject. A question on a tiger reserve is Environment and Mapping at once. Follow the "Also relates to" links while you revise.

FAQ

APSC Prelims PYQs: questions students ask

Which paper is the APSC Prelims 2026 question paper?

The CCE 2025 Prelims, held in July 2026, is the paper students call the 2026 question paper. All its 100 questions are here with answers and explanations: choose 2025 under Paper. The official PDF is on our APSC Prelims 2026 question paper page.

Which APSC Prelims papers are included?

General Studies Paper I of CCE 2020, 2022, 2023, 2024 and 2025: 100 questions from each paper, 500 in all. CSAT (Paper II) is not included.

Are the answers official?

Answers follow the official APSC final answer key. 41 questions also carry an answer-key note: where the key itself was wrong, the question had an error, grace marks were given or a fact has changed since the exam, the note under the answer explains it.

Who wrote the explanations?

They come from the SuchitraACS APSC Prelims PYQ Analysis 2020-2025 by Amit Sir. If you find a mistake, tap "Report an error" under that question and it reaches us on WhatsApp.

Is it free, and where is my progress saved?

It is free and needs no sign-up. Your answers in Practise and your saved questions stay only in this browser on this device; nobody else can see them. Clearing browser data or changing phone resets them, and you can clear them yourself from the progress bar.

Can I download the question papers as PDF?

Yes. The official papers are free PDFs: the APSC Prelims 2026 question paper (CCE 2025) and the APSC Prelims papers of 2020 to 2024.